Schwarzes Siliziumkarbid F080 TYPISCHE CHEMISCHE ANALYSE [%]
| So | Fe2O3 | FC | F.Si | SiO2 | GESETZ |
| ≥98,5% | 0,15 | 0.30 | 0,40 | 0.70 | <0,09 |
Schwarzes Siliziumkarbid F080 PHYSIKALISCHE EIGENSCHAFTEN
| Bestimmtes Gewicht | 3,95 g/cm3 |
| Mohs-Härte | 9.15 |
| Maximale Betriebstemperatur | 1900 °C |
| Schmelzpunkt | 2250°C |
PARTIKELGRÖßENVERTEILUNG aus schwarzem Siliziumkarbid
| F008 | +4000um | 0 | +2800um | ≤20% | +2360um | ≥45% | +2360+2000um | ≥70% | -1700um | ≤3% |
| F010 | +3350um | 0 | +2360um | ≤20% | +2000um | ≥45% | +2000+1700um | ≥70% | -1400um | ≤3% |
| F012 | +2800um | 0 | +2000um | ≤20% | +1700um | ≥45% | +1700+1400um | ≥70% | -1180um | ≤3% |
| F014 | +2360um | 0 | +1700um | ≤20% | +1400um | ≥45% | +1400+1180um | ≥70% | -1000um | ≤3% |
| F016 | +2000um | 0 | +1400um | ≤20% | +1180um | ≥45% | +1180+1000um | ≥70% | -850um | ≤3% |
| F020 | +1700um | 0 | +1180um | ≤20% | +1000um | ≥45% | +1000+850um | ≥70% | -710um | ≤3% |
| F022 | +1400um | 0 | +1000um | ≤20% | +850um | ≥45% | +850+710um | ≥70% | -600um | ≤3% |
| F024 | +1180um | 0 | +850um | ≤25% | +710um | ≥45% | +710+600um | ≥65% | -500um | ≤3% |
| F030 | +1000um | 0 | +710um | ≤25% | +600um | ≥45% | +600+500um | ≥65% | -425um | ≤3% |
| F036 | +850um | 0 | +600um | ≤25% | +500um | ≥45% | +500+425um | ≥65% | -355um | ≤3% |
| F046 | +600um | 0 | +425um | ≤30% | +355um | ≥40% | 355+300um | ≥65% | -250um | ≤3% |
| F054 | +500um | 0 | +355um | ≤30% | +300um | ≥40% | +300+250um | ≥65% | -212um | ≤3% |
| F060 | +425um | 0 | +300um | ≤30% | +250um | ≥40% | 250 + 212um | ≥65% | -180um | ≤3% |
| F070 | +355um | 0 | +250um | ≤25% | + 212um | ≥40% | +212+180um | ≥65% | -150um | ≤3% |
| F080 | +300um | 0 | + 212um | ≤25% | +180um | ≥40% | +180+150um | ≥65% | -125um | ≤3% |
| F090 | +250um | 0 | +180um | ≤20% | +150um | ≥40% | +150+125um | ≥65% | -106um | ≤3% |
| F100 | + 212um | 0 | +150um | ≤20% | +125um | ≥40% | +125+106um | ≥65% | -75um | ≤3% |
| F120 | +180um | 0 | +125um | ≤20% | ≥40% | ≥40% | +106+90um | ≥65% | -63um | ≤3% |
| F150 | +150um | 0 | +106um | ≤15% | +75um | ≥40% | +75+63um | ≥65% | -45um | ≤3% |
| F180 | +125um | 0 | +90um | ≤15% | +75um | * | +75+63um | ≥40% | -53um | * |
| F220 | +106um | 0 | +75um | ≤15% | +63um | * | +63+53um | ≥40% | -45um | * |
Schwarzes Siliziumkarbid KAPITEL Ⅰ（JIS STANDARD）
| Größe | TUN (eins) | D3 (eins) | D50 (eins) | D94 (eins) |
| #240 | 127 | 103 | 57,0±3,0 | 40 |
| #280 | 112 | 87 | 48,0±3,0 | 33 |
| #320 | 98 | 74 | 40,0±2,5 | 27 |
| #360 | 86 | 66 | 35,0 ± 2,0 | 23 |
| #400 | 75 | 58 | 30,0 ± 2,0 | 20 |
| #500 | 63 | 50 | 25,0 ± 2,0 | 16 |
| #600 | 53 | 41 | 20,0±1,5 | 13 |
| #700 | 45 | 37 | 17,0 ± 1,5 | 11 |
| #800 | 38 | 31 | 14,0±1,0 | 9.0 |
| #1000 | 32 | 27 | 11,5 ± 1,0 | 7.0 |
| #1200 | 27 | 23 | 9,5±0,8 | 5.5 |
| #1500 | 23 | 20 | 8,0±0,6 | 4.5 |
| #2000 | 19 | 17 | 6,7±0,6 | 4.0 |
| #2500 | 16 | 14 | 5,5±0,5 | 3.0 |
| #3000 | 13 | 11 | 4,0±0,5 | 2.0 |
| #4000 | 11 | 8.0 | 3,0±0,4 | 1.8 |
| #6000 | 8.0 | 5.0 | 2,0±0,4 | 0.8 |
| #8000 | 6.0 | 3.5 | 1,2±0,3 | 0,6 |
Schwarzes Siliziumkarbid KAPITEL Ⅱ（FEPA STANDARD）
| Größe | D3 (eins) | D50 (eins) | D94 (eins) |
| F230 | 82 | 53,0±3,0 | >34 |
| F240 | 70 | 44,5 ± 2,0 | >28 |
| F280 | 59 | 36,5 ± 1,5 | >22 |
| F320 | 49 | 29,2 ± 1,5 | >16,5 |
| F360 | 40 | 22,8±1,5 | >12 |
| F400 | 32 | 17,3 ± 1,0 | >8 |
| F500 | 25 | 12,8±1,0 | >5 |
| F600 | 19 | 9,3 ± 1,0 | >3 |
| F800 | 14 | 6,5±1,0 | >2 |
| F1000 | 10 | 4.5±0.8 | >1 |
| F1200 | 7 | 3,0±0,5 | > 1 (bei 80%) |
| F1500 | 5 | 2,0±0,4 | >0,8 (bei 80%) |
| F2000 | 3.5 | 1,2±0,3 | > 0,5 (bei 80%) |
HAUPTSÄCHLICH ANWENDUNGEN VON Schwarzem Siliziumkarbid F080
- Gebundene Schleifmittel und beschichtete Schleifmittel
- Strahlen, Oberflächenbehandlung, Rostentfernung
- Nass- und Trockenstrahlmittel, Schleifen und Polieren usw.
- Boden-/Wandlaminate, verschleißfest
- Keramikprodukte: Keramik und Fliesen, Keramikfilterplatte, Keramikmembran usw
- Teflonlackierung usw.
- Wärmeisolierendes Material
- Schleifscheiben, Topfscheiben, Schleifstein, Polierpads usw.
- Wird für Tiegel, Brennofenteile, Gleitringdichtungen und Teilematerialien zur Herstellung von Halbleitern verwendet
VERPACKUNG
25kgs PVC-Beutel + 1mt Big Bag
25kgs PVC-Beutel + Palette
 |
 |
 |
| 25 kg PVC-BEUTEL | 25 KGS TASCHEN + 1 MT BIG BAG | 25KGS PVC-BEUTEL+PALETTE |
